Description
Trailing Arm | URC Trailing Arms | Double Shock Mount Set-Up | by: RuffStuff
Ultimate Rock Crawling Trailing Arms / heavy duty trailing arms specifically designed for the rocks! They have been tested and tortured in Ultra4 racing's 4400 class so you know they can handle anything you throw at them! They've been designed the RuffStuff way of STRENGTH, QUALITY, VALUE!
Easy weld-it-yourself kit for the competent welder or completely welded and ready to install, they are narrow-profile, easily customized, and tough as nails. These come with a Lifetime Warranty when welded by RuffStuff Specialties, All competitive racing applications INCLUDED!! Our URC Trailing Arms measure 48" eye-to-eye, with a 2" x .25" wall DOM main tube, 1/4" thick 1-piece main plate bent 3 times for maximum strength, minimal welding and warpage, and easy assembly.
Shocks mount BELOW the line between the bushing and heim (Unlike some competitors!) which prevents the trailing arm from trying to rotate when the shocks push down on it because the shocks "hang" below the center line. This Extends bushing life because the bushings and shocks are pushing to keep the arm straight together rather than the shocks fighting the bushings and trying to rotate the arm. These arms could be customized to use heims and uniballs instead of bushings (even without wobble stops). Dual drain slots allow for easy cleaning and helps extend life of shock eyelet bearings.
Features
- Will not cause bent shock shafts should a bushing wear out or fail.
- Second hole can be used as a strong and simple limiting strap mount if bypasses aren't used.
- 3" wide polyurethane bushings at the frame side and our famous 1-1/4" heim joints on the axle side.
- 1/2" shock bolt holes set for 1.5" misalignment width.
- Each arm weighs in at ~40lbs welded.
Notes:
- Please allow 5-7 days lead time if you choose for us to weld them.
- Due to tolerances in the tube and plate bending, slight grinding may be necessary for perfect fitment of components
- Instructions available under Resources tab above.
Kit Includes:
- (2) Pre-bent pieces of 2" x .25" Wall DOM
- (2) 1/4" main plates
- (2) 1/4" shock valleys
- (4) 1/4" overlay plates
- (2) Bushing sets with 9/16" bolt sleeves
- (2) 1 1/4" tube adapters
- (2) 1 1/4" Rod Ends
- (2) 1 1/4" Jam Nuts
- (4) Stainless Steel Misalignment Spacers
Options:
-
Welded: Yes or NO
-
Degree (For Welded Kits ONLY): 0*, 5*, 10*
-
Misalignment Hole Size: 9/16, 5/8, 3/4
LIFETIME WARRANTY! (when welded by RuffStuff Specialties) All competitive racing applications INCLUDED!!
Please allow 5-7 days for shipping if you choose for us to weld them.
Warranty Information
RUFFSTUFF RACE OR OFF-HIGHWAY USE PARTS WARRANTY
RUFFSTUFF Race or Off-Highway Use Parts have no warranty. Should any RUFFSTUFF Race or Off-Highway Use Parts shown in this catalog prove defective following their purchase, the buyer and not the manufacturer, distributor, dealer or retailer, shall assume the entire cost of all necessary servicing or repair of the defective part and of any damage that may have been caused by the defective part. The buyer assumes the entire risk as to the performance of such parts. To the fullest extent permitted by applicable federal, state, local or other law, RUFFSTUFF expressly disclaims the implied warranties of merchantability and of fitness for a particular purpose, even if this catalog or any other materials mention a particular purpose for a RUFFSTUFF Race or Off-Highway Use Part.
RUFFSTUFF also disclaims all liability for direct, indirect, special, incidental, or consequential damages, including, but not limited to, damage to or loss of personal property, loss of profits or revenue, cost of purchase of replacement goods, or claims of customers of the purchaser that result from the use of any and all RUFFSTUFF Race or Off-Road Use Parts contained in this catalog. RUFFSTUFF Race or Off-Highway Use Parts are for race or off-highway purposes only. Vehicles equipped with RUFFSTUFF Race or Off-Highway Use Parts should not be operated on public roads.
RUFFSTUFF offers RUFFSTUFF Race or Off-Highway Use Parts for track or off-highway competitive or performance use only. Installation of any RUFFSTUFF Race or Off-Highway Use Part on a vehicle operated on public roads may violate federal, state or local laws or regulations including, but not limited to, emission requirements and motor vehicle safety standards. In California these parts may legally be used only on a racing vehicle that will never be operated on public roads. In addition, federal statutes, regulations and laws in many states prohibit the removal, modification, alteration or disconnecting of any parts or elements of a vehicle's design affecting emissions or safety on vehicles intended for use on public streets or highways. RUFFSTUFF customers are responsible for ensuring that the use of any RUFFSTUFF Race or Off-Road Use Part complies with all applicable federal, state or local laws, regulations and ordinances.
Installation of RUFFSTUFF Race or Off-Highway Use Parts may adversely affect the warranty coverage on your vehicle. The addition of RUFFSTUFF Race or Off-Highway Use Parts on a vehicle is not covered by the vehicle warranty and any failure that they may cause is also not covered by the vehicle warranty.
RUFFSTUFF Race or Off-Highway Use Parts should not be installed on a vehicle intended for use on public roads. RUFFSTUFF Race or Off-Highway Use Parts should not be sold or financed in conjunction with the sale of a new vehicle.
RENO OFF-ROAD RETURN POLICY
Customer satisfaction is our top priority. We accept returns on unused products, buyers have decided against them after receiving them, on a case-by-case basis.
Contact us if you ordered a product that you have since decided against, and we will do our very best to get it returned or exchanged.
Any unused merchandise in the original packaging may be returned within 10 days of the original purchase date or received date depending on the shipping timeline. There are no returns on electrical items, special orders such as build to order products. Discontinued items will be evaluated to determine if the product can be returned. No returns will be accepted of damaged (by user) or used items.
Return requests need to be submitted using the attached form, so we can issue an RMA. Please include the original packaging and a copy of your invoice or receipt.
For more information or any other questions you may have, please call us at 1-75-553-8333 or email info@renooffroad.com during normal business hours 8:00am to 5:00pm PST Monday to Friday
