RuffStuff

Ford Dana 60 Full Float 77-84 Rear Axle Disc Brake Kit Our disc brake conversion kits are the best conversion to eliminate drum brakes, in many cases it is less expensive to switch to disc brakes...

Chevy/ Dodge Front Dana 60 Kingpin Axle Disc Brake Kit This is for your Dana 60 kingpin front axles for 1977-1991 Chevy/GMC 1 ton and Dodge trucks 1990-1993 with...

Ford Dana 60 Full Float 67-76 Rear Axle Disc Brake Kit Our disc brake conversion kits are the best conversion to eliminate drum brakes, in many cases it is less expensive to switch to...

5/8 ROD END - LEFT HAND - HEIM From RuffStuff:  "Of all the Heim Joints we sell it only made sense to make them the way we wanted them... This is a 5/8" shaft with a 5/8" bore (18TPI). Don't...

5/8 ROD END - RIGHT HAND - HEIM From RuffStuff: Of all the Heim Joints we sell it only made sense to make them the way we wanted them... This is a 5/8" shaft with a 5/8" bore (18TPI). Don't let...

Trailing Arm | URC Trailing Arms | Single Shock Mount Set-Up | by: RuffStuff Ultimate Rock Crawling Trailing Arms / heavy duty trailing arms specifically designed for the rocks! They have been...

This is just what the doctor ordered when you just jammed a rock with the stock 1/16" thick tie rod or a solid tie rod. These are 1.5" in diameter and .25" thick and can take a hit over and over...

  Beefing up the front end & need to fit 1 ton components to your knuckle. Then this is the tool you will need to ream out your knuckles to fit our GM 1 Ton TRE's. If you want to...

Our RuffStuff brake conversion kit is extremely popular due to the fact it is made by RuffStuff who makes top notch bomb proof products, and the application it is made for is one of the most common...

Includes: 2-Perches for one axle Dimensions: Axle diameter: 3 1/4 or 3 1/8" Width: 2.5" This is a new variation on one of our fairly basic items, but it isn't quite that basic. Here's...

KIT INCLUDES: 2--3/4" X 3/4" Bore Heat Treated Chromoly Heims 2--3/4" Tube Adapters (1" Tube ID) 2--3/4" Jam Nuts 4--Misalignment Spacers (For 2" ID brackets) This is it, the Left and...

You get a pair of 7/8" x 3/4" Heat Treated Chromoly Rod Ends. You get two 7/8" Heims with a 3/4" through bore, 4 zink plated misalignment spacers with 34 degrees of misalignment, a...

Optima Single Battery Box Designed with fabricators in mind, our battery box is constructed from a single piece of steel, requiring no welds and boasting tight tolerances to prevent battery...

Trailing Arm | URC Trailing Arms | Double Shock Mount Set-Up | by: RuffStuff Ultimate Rock Crawling Trailing Arms / heavy duty trailing arms specifically designed for the rocks! They have been...

Simple Traction Bar by RuffStuff Sizes: 48" |  60"  |  72" If you have a tall, lifted, high power truck you probably know the problems with rear axle wandering, causing wheel hop...

Includes: 2-Perches for one axle Dimension: Axle diameter: 2.5" Width: 2.0" These Spring Perches are made for Early CJ & M series Jeep width (1.75" - 2.25") Leaf Springs, there is...

Includes: 2-Perches for one axle Dimensions: Axle diameter: 2.75" Width: 2.5" This is one of our fairly basic items, but it isn't quite that basic. Anyway, here's what you want...

Includes: 2 - Perches for one axle Dimension: Axle diameter - 2.5" Width: 2.5" This is one of our fairly basic items, but it isn't quit e that basic. Anyway, here's what you want to know...

This is what you have been waiting for! These are an offshoot of our 3 Legged Link Brackets, you will see the similarities. We wanted to make a bracket to eliminate the Single Shear of Shock...

Ruff Stuff made this 1/4" thick bracket with the factory size mounting hole to fit the upper clevite bushing on most factory TJ, LJ, XJ, ZJ, JK and MJ Jeeps. To use this with a JK...