JL / JT Ram Assist Steering Axle Bracket | Low Steer | RockJock

$29.11 (Fixed Shipping Cost)
  • JL / JT Ram Assist Steering Axle Bracket | Low Steer | RockJock (RJ-441104-101)
  • JL / JT Ram Assist Steering Axle Bracket | Low Steer | RockJock (RJ-441104-101)
  • JL / JT Ram Assist Steering Axle Bracket | Low Steer | RockJock (RJ-441104-101)


The RockJock Ram Assist Steering Axle Bracket for all JL Wrangler, JL Unlimited and JT Gladiator vehicles equipped with factory differentials and low-steer knuckles provides a simple, bolt-on solution for anchoring the axle housing side of your ram assist steering ram.
Installing ram assist steering and getting the geometry correct the first time has never been viewed as an easy thing until now! Our bracket systems genuinely do make bolting a ram onto your vehicle just that – bolt-on and forget it!
Semi-gloss black powder coated 3/16 in. steel bracket includes all mounting hardware. See attached diagram for fitment.

Kit Fits:

  • JL Wrangler Unlimited (4-door) – All Models (with any stock front axle and low-steer knuckles)
  • JL Wrangler (2-door) – All Models (with any stock front axle and low-steer knuckles)
  • JT Gladiator – All Models (with any stock front axle and low-steer knuckles)

Kit Includes:

  • (1) Ram Assist Steering Axle Bracket
  • All required hardware


  • For use with factory differentials only!
  • For use in low steer applications only! For high-steer application see RJ-441109-103.
  • See diagram for fitment here.

Parts List:

  • Steel Axle Bracket: RJ-441104-1
  • Steel Washer Plate: RJ-441104-5
  • 5/8 in.-18 x 1 3/4 in. Long Hex Bolt: RJ-501210-3
  • 5/8 in. Flat Washer: CE-98023A035
  • 14mm-1.50 x 80mm Long Hex Bolt: RJ-501102-1
  • 12mm-1.75 x 75mm Long Hex Bolt: RJ-501100-1
  • 12mm Flat Washer: CE-91455A150
  • 12mm-1.75 Stover Nut: RJ-502104-1
  • 10mm-1.5 x 30mm Flanged Hex Bolt CE-98093A624
  • 10mm-1.5 Flanged Stover Nut: RJ-502105-1
  • 3/8 in. Flat Washer: RJ-90108A415



View AllClose

Warranty Information


John Currie Performance Group, Inc. DBA Rock Jock (“RockJock”) warranties, to the original purchaser with physical proof of purchase, all items manufactured by RockJock to be free from defects in materials and workmanship for the limited period of two (2) years from the stated delivery date on invoice. Any alteration or improper use as determined by RockJock in its sole discretion will void this warranty. Further, we disclaim any liability for action resulting from failure or parts durability. We disclaim any express or implied warranties, including, without limitation, implied warranties of merchantability, condition of any kind and fitness for a particular purpose. Our products may be subject to an infinite variety of conditions due to the manner in which they are used, serviced and/or installed. Purchasers and users of such products rely upon their own judgment as to the suitable use, selection, service, and installation of such products. This warranty does not cover damage caused by or facilitated by failure of non-RockJock components. This warranty does not extend to, and RockJock shall not be liable for, any agreements or representations made by dealers or resellers of RockJock products beyond what is stated here.

Because all parts which we sell are intended for use in heavy duty applications, it is not possible to warranty or guarantee the performance of any items under all circumstances. Each warranty represents the sole and exclusive remedy for any product defect or failure and our total liability for any part we warrant. RockJock’s liability under this warranty shall be limited to the cost for repair, replacement or an upgrade of the product (at RockJock’s sole and absolute discretion). Upgrade cost would be at the user’s expense. Consequential costs such as, but not limited to labor fees, loss of use, loss of revenue, loss of time, towing fees or freight charges are not covered. Any product that, in the opinion of RockJock, has been abused, altered, incorrectly installed or used in competition is not covered. Nothing in this warranty is intended to be a representation by RockJock that offroad component failures cannot occur.

Warranty Procedure:

Contact your RockJock dealer [RENO OFF-ROAD] or RockJock directly about the problem prior to removing any part from the vehicle. If it appears that the part is warrantable through means of verbal and/or written communication and photos, you will be given a Return Materials Authorization (RMA) Number and asked to return the part to RockJock, freight prepaid. If the part is found to be warrantable, it will be repaired or replaced and returned to you. All freight charges are the customer’s responsibility. If a replacement part is needed before the part in question can be returned, you must first purchase the replacement part. Then, if the part in question is deemed warrantable, you will be credited / refunded.


Customer satisfaction is our top priority. We accept returns on unused products, buyers have decided against them after receiving them, on a case-by-case basis.

Contact us if you ordered a product that you have since decided against, and we will do our very best to get it returned or exchanged.

Any unused merchandise in the original packaging may be returned within 10 days of the original purchase date or received date depending on the shipping timeline. There are no returns on electrical items, special orders such as build to order products. Discontinued items will be evaluated to determine if the product can be returned. No returns will be accepted of damaged (by user) or used items.

Return requests need to be submitted using the attached form, so we can issue an RMA. Please include the original packaging and a copy of your invoice or receipt.

For more information or any other questions you may have, please call us at 1-75-553-8333 or email during normal business hours 8:00am to 5:00pm PST Monday to Friday

View AllClose