Description
The RockJock High Steer Knuckles for all JL Wrangler and JT Gladiator models are a game changer! Simply installing these knuckles raises your tie rod 2 3/4 in. and your drag link 2 1/2 in.!
These knuckles, for use on factory axles or axles that retain factory inner C-knuckles, are intended for use with our other high steer components, to give you a package that provides all the necessary components to accommodate the higher steering location, adjust all geometry points and allow you to easily install a hydraulic assist steering ram, or to reinstall your stabilizer shock!
Our knuckles are manufactured to greater than OEM standards in every way. Features include premium iron castings, gloss black finish and precise machining for a component that installs just like factory. Additionally, we've provided extra threaded steering stop bolt holes ahead of the axle to allow for a second set of stops to be added, giving you firm steering lock stops on both wheels at all times, easing strain on other components.
For best results, it is highly recommended that these knuckles be used in conjunction with one of our knuckle kits that include all of the other components to make this installation easy. Our RJ-440000-101 kit includes our forged, high articulation Drag Link, our 42mm chromoly Tie Rod, as well as the bracket and clamp kits to allow you to install a hydraulic assist steering ram. We also offer our RJ-440001-101 kit that includes the same Drag Link and Tie Rod, as well as the bracket and clamp kits to allow you to reinstall your steering stabilizer shock at a much higher, protected height.
Additionally, we recommend the use of our RJ-9120FJLF forged, organically shaped front trac bar, so that all components nest together for maximum up travel as engineered.
Kit Fits:
*Fits all listed vehicles below, granted they retain the factory front differential, or any aftermarket differential that features factory spec. inner C-knuckles.
- JL Wrangler Unlimited (4-door)
- JL Wrangler JL (2-door)
- JT Gladiator
Kit Includes:
- Left side high steer steering knuckle
- Right side high steer steering knuckle
Fitment Specs.:
- For use on any factory JL or JT front differential, or any aftermarket replacement axle that features factory specification inner C-knuckles
- Retains factory unit bearings, axle shafts, ball joints, steering stop bolts & brakes with dust shields.
- Intended to be used with a minimum of a 17 in. diameter wheel and up to a 6 in. wheel backspacing.
- A minimum of a 2.2 in. bump stop extension is mandatory to keep components from crashing under full articulation range conditions. See our RJ-107101-101 adjustable front bump stop kit for an easy to use solution.
Notes:
- For optimum performance of these knuckles, we recommend purchasing them in one of our kits that provide the balance of the components for ease of use. See: RJ-440000-101 and RJ-440001-101
- These knuckles were designed in conjunction with and intended for use with our RJ-442100-101 steering system.
** These knuckles may or may not work with stock or other aftermarket tie rods and drag links - we have not done that testing!
Parts List:
- High Steer Knuckle (LH)
- High Steer Knuckle (RH)
- 10mm-1.5 x 30mm Button Head Allen Bolt: RJ-501110-1
- 10mm-1.5 x 35mm Button Head Allen Bolt: RJ-501110-3
- 10mm-1.5 Jam Nut (RH thread): RJ-502110-1
- Cotter Pin: CE-98338A190
Warranty Information
ROCKJOCK WARRANTY:
John Currie Performance Group, Inc. DBA Rock Jock (“RockJock”) warranties, to the original purchaser with physical proof of purchase, all items manufactured by RockJock to be free from defects in materials and workmanship for the limited period of two (2) years from the stated delivery date on invoice. Any alteration or improper use as determined by RockJock in its sole discretion will void this warranty. Further, we disclaim any liability for action resulting from failure or parts durability. We disclaim any express or implied warranties, including, without limitation, implied warranties of merchantability, condition of any kind and fitness for a particular purpose. Our products may be subject to an infinite variety of conditions due to the manner in which they are used, serviced and/or installed. Purchasers and users of such products rely upon their own judgment as to the suitable use, selection, service, and installation of such products. This warranty does not cover damage caused by or facilitated by failure of non-RockJock components. This warranty does not extend to, and RockJock shall not be liable for, any agreements or representations made by dealers or resellers of RockJock products beyond what is stated here.
Because all parts which we sell are intended for use in heavy duty applications, it is not possible to warranty or guarantee the performance of any items under all circumstances. Each warranty represents the sole and exclusive remedy for any product defect or failure and our total liability for any part we warrant. RockJock’s liability under this warranty shall be limited to the cost for repair, replacement or an upgrade of the product (at RockJock’s sole and absolute discretion). Upgrade cost would be at the user’s expense. Consequential costs such as, but not limited to labor fees, loss of use, loss of revenue, loss of time, towing fees or freight charges are not covered. Any product that, in the opinion of RockJock, has been abused, altered, incorrectly installed or used in competition is not covered. Nothing in this warranty is intended to be a representation by RockJock that offroad component failures cannot occur.
Warranty Procedure:
Contact your RockJock dealer [RENO OFF-ROAD] or RockJock directly about the problem prior to removing any part from the vehicle. If it appears that the part is warrantable through means of verbal and/or written communication and photos, you will be given a Return Materials Authorization (RMA) Number and asked to return the part to RockJock, freight prepaid. If the part is found to be warrantable, it will be repaired or replaced and returned to you. All freight charges are the customer’s responsibility. If a replacement part is needed before the part in question can be returned, you must first purchase the replacement part. Then, if the part in question is deemed warrantable, you will be credited / refunded.
RENO OFF-ROAD RETURN POLICY
Customer satisfaction is our top priority. We accept returns on unused products, buyers have decided against them after receiving them, on a case-by-case basis.
Contact us if you ordered a product that you have since decided against, and we will do our very best to get it returned or exchanged.
Any unused merchandise in the original packaging may be returned within 10 days of the original purchase date or received date depending on the shipping timeline. There are no returns on electrical items, special orders such as build to order products. Discontinued items will be evaluated to determine if the product can be returned. No returns will be accepted of damaged (by user) or used items.
Return requests need to be submitted using the attached form, so we can issue an RMA. Please include the original packaging and a copy of your invoice or receipt.
For more information or any other questions you may have, please call us at 1-75-553-8333 or email info@renooffroad.com during normal business hours 8:00am to 5:00pm PST Monday to Friday
