Currie RockJock | 60 1-Ton Front End | Brakes

Calculated at Checkout
  • Currie RockJock | 60 Rear Axle Housing | Eaton Elocker | 5.13 at
  • Currie RockJock | 60 1-Ton Front End | Brakes  at
  • Currie RockJock | 60 Rear Axle Housing | Eaton Elocker | 5.13 at
  • Currie RockJock | 60 1-Ton Front End | Brakes  at



  • 97-06 Wrangler TJ/LJ
  • 13.25" brakes
  • 5 lug with 1/2" studs
  • Includes steering linkage
  • Bolt in installation
  • Complete housing featuring the 65-45-12 ductile iron housing center section, skid plate, steering knuckles, steel diff cover and 1350 yoke
  • 4340 35-spline axle shafts
  • Spicer 1480 u-joints
  • 1 ton outer knuckles
  • 64" wide
  • Requires the use of 17" wheels
  • California Residents: WARNING

Bolt-in one ton RockJock® III high pinion 60 front end package for Jeep TJ Wrangler and LJ Unlimited vehicles includes the complete housing featuring the 65-45-12 ductile iron housing center (highest ground clearance 60 on the market), AR400 heat treated bottom skid plate allowing the axle to slide over rocks easily, 3" d.o.m. steel tubes, 1 ton inner knuckles, 5/16" thick heavy steel diff cover, 1350 yoke, and all new heavy duty Currie Jeep TJ suspension brackets mounted with Johnny Joint® equipped upper control arm mounts for maximum articulation.

Axles shafts are the Currie performance 4340 35 spline inner and outer with Spicer 1480 u-joints. Outer assemblies include 1 ton outer knuckles featuring Currie upper steering arm and ball joints installed, 1 ton unit bearings with 5 on 5 1/2" wheel bolt pattern & 1/2" studs, 13.25" vented rotors, Jeep JK calipers, zinc plated caliper brackets, and your choice of Warn premium manual locking hubs or Currie drive flanges. Steering is included and features our heavy duty 1 1/4" o.d. 4130 chromoly tie rod and drag link tubes with tie rod ends, custom adjusters, and heavy duty clamps.

Finishing off the package is the adjustable length Johnny Joint® trac bar, heavy duty trac bar relocation bracket, trac bar relocation bracket brace, and brace bracket. All you need to complete this unit is a high pinion 60 ring & pinion gear set, Dana 60 35 spline carrier of your choice, a center section bearing & set up kit and the labor to set it up!

Assembly labor of this unit is included in the price! Housing comes bare metal, all other parts finished in either semi-gloss black powder coat or zinc plating. All hardware and complete installation instructions are included. NOTES: This unit is 64" wide. This unit requires the use of 17" wheels.

View AllClose

Warranty Information

Warranty Currie Enterprises (Currie) warranties, to the original purchaser, all items manufactured by Currie to be free from defects in materials and workmanship for 2 (two) years from delivery date on invoice. Any alteration or improper use will void this warranty. Because all parts which we sell are intended for use in heavy duty applications, it is not possible to warranty or guarantee the performance of any items. Further, we disclaim any liability for action resulting from failure or parts durability. We disclaim any express or implied warranties. Our products may be subject to an infinite variety of conditions due to the manner in which they are used, serviced and/or installed. Purchasers and users of such products rely upon their own judgment as to the suitable use, selection, service, and installation of such products. This warranty does not cover damage caused by or facilitated by failure of non-Currie components. This warranty and Currie shall not be liable for any agreements or representations made by dealers or resellers of Currie products beyond what is stated here.

This warranty is non-transferable. Currie Enterprises limit of liability under this warranty is to repair or replace the product at Currie’s option. Consequential costs such as, but not limited to labor fees, loss of use, loss of revenue, loss of time, towing fees or freight charges are not covered. Any product that has been abused, altered, incorrectly installed or used in competition is not covered. Nothing in this warranty is intended to be a representation by Currie that drivetrain failures cannot occur. Warranty Procedure Contact your Currie dealer or Currie Enterprises about the problem prior to removing any part from the vehicle. If it appears that the part is warrantable, you will be given a Return Authorization (RA) Number and asked to return the part to Currie, freight prepaid. If the part is found to be warrantable, it will be repaired or replaced and returned to you. All freight charges are the customer’s responsibility. If a replacement part is needed before the part in question can be returned, you must first purchase the replacement part. Then, if the part in question is deemed warrantable, you will be credited / refunded.

View AllClose