Reno Off Road

SUSPENSION COMPONENTS

COIL - OVER CONVERSION KIT

Bolt-in kit allows you to eliminate rear torsion bars in order to change to coil-over suspension.

Comes with high quality chromoly Heim-ends with Nylafiber liners.

Machined load boss transfers wheel load torsion housing.
On stock torsion housings, it is necessary for the plate that replaces the spring blade to have an "offset" in order to line up properly with the trailing arm.

Priced from: $150.00
Pricing depends on components & vehicle options.

Available for:

Stock VW Type I IRS torsion housing

Aftermarket IRS torsion housing with 2" I.D.

Aftermarket IRS torsion housing with 2 1/4" I.D

All complete sets including Heim-ends.

Prices are subject to change.
Contact us for pricing and shipping quote:

ADJUSTABLE SPRING PLATES

External dial allows 1-1/2" up or down adjustments. Adjustments allow in one bar setting a multitude of results in camber and height. Dial in your suspension in an instant.

Bolt-on installation. Silver zinc-plated steel for corrosion resistance. Includes inner & outer urethane grommets. Sold in pairs.

Beetle - Air Cooled 1961 - 1968

Short (21-3/4") Adjustable Swing-axle Spring Plates

Part #: 26CP1509R

Price: $493.99

Shipping: $34.99

Beetle - Air Cooled 1969 - 1979

IRS Chassis - Short (21-3/4") Adjustable IRS Spring Plates

Part #: 26CP1506N

Price: $439.99

Shipping: $34.99

Fastback 1966 - 1969

Medium (24-11/16") Adjustable IRS Spring Plates

Part #: 26CP1507T

Price: $459.99

Shipping: $34.99

Fastback 1973 - 1979

Long (26-9/16") Adjustable IRS Spring Plates

Part #: 26CP1508A

Price: $489.99

Shipping: $34.99

3" x 3" REAR TRAILING ARMS

Includes bolt-in aluminum bearing carriers.
Light weight chromoly tubing (approx 12lbs each).
3" wider & 3" long than stock.

Available with Type 1 bearing carrier.
Accepts up to 930 CVs.

Will work on any torsion housing that will accept a stock trailing arm.

3" x 3" Set: $450.00 / Set
Single shock mounting kit = $40.00 ($80.00 installed)

Price for 3" x 3" Set: $470.00
Single shock mounting kit = $45.00 ($85.00 installed)

Prices are subject to change.
Contact us for pricing and shipping quote:

4" x 5" REAR TRAILING ARMS

Includes bolt-in aluminum bearing carriers.
Light weight chromoly tubing (approx 19lbs each).
4" wider & 5" longer than stock - allows 17"+ wheel travel.
Complete arm with Rod End and Load Boss.

Available with Type 1 or Micro-stubs.
Accepts up to 930 CVs.
Will work on any torsion housing that will accept a stock trailing arm.

Price for 4" x 5 set: $780.00

Single shock mounting kit = $50.00 ($100.00 installed)

Price for 4" x 5 set: $796.00

Single shock mounting kit = $55.00 ($105.00 installed)

Prices are subject to change.
Contact us for pricing and shipping quote:

EXTENDED FRONT TRAILING ARMS

Allows up to 8" of travel with stock shock towers
Up to 13" with 10" travel shocks (depending on steering and configuration).
4130 chromoly tubing. Lower arms 3/16" wall thickness tubing for added stength.
2.25" longer and 1" wider than stock.
Uses aftermarket "set screw" type link pins.

Available in 2 sizes:
2 1/4" longer by 1" wider (per side) = $437.00 / set.
4" longer by 1 3/4" wider (per side) = $460.00 / set.

Also available in 4" x 1/34" for Chenowth Explorer Chassis = $460.00.00/set

Prices are subject to change.
Contact us for pricing and shipping quote:

LONG TRAVEL FRONT BEAM

Replaces front beam for VW link pin front end.
Eliminates stock spring blades. Complete with threaded rods to hold arms in place and supplied with grease fittings and pivot bushings.
10" wheel travel with stock arms
Up to 13" with 2.25" extended arms.

6" wide than stock with tubing shock towers for added strength. Light weight (30 lbs).
Uses 10" travel coil-over shocks.
Chromoly tubing with additional bracing.

Standard front beam = $475.00
Extreme use front beam = $595.00

Prices are subject to change.
Contact us for pricing and shipping quote:

IRS BOX KIT

Strengthens IRS trailing arms for off-road use

An economical alternative to custom-fabricated trailing arms

6 precut steel pieces must be welded to the inside back, top and bottom of stock IRS rear trailing arm, dramatically improving strength and rigidity

Not compatible with stock shock mounts.

Vehicle options:

Volkswagen Beetle - Air Cooled 1954 – 1979

Volkswagen Dune Buggy/Sand Rail 1954 – 1979

Volkswagen Super Beetle 1954 - 1979

Part #: 49CP7256U

Price: $56.99

Shipping: $11.99

Shop With Confidence !!

Solution Graphics